...
SMART-X.T.N.

External SMART repair spray booth

Our flagship offering for busy bodyshops and smart repair centres. A self-contained, compliant external SMART repair spray booth. Installed externally or in the yard to increase capacity and throughput by saving valuable indoor floorspace. Supplied and installed.

Fixed price
£21,600 ex VAT
• Finance available from £758.16/mo on a 3 year agreement*
Key features
  • Self contained external steel building, 7m x 4m x 2.5m to eaves
  • Single skin plastisol coated steel cladding on galvanised steel framing
  • 1.1kW spark proof fan with controller, 2.06m3/s extraction rate
  • 0.7m/sec air flow through the booth face as per HSG140
  • Two stage paint stop filtration, 900mm high
  • Roller door, personnel door, skylights and three ATEX zone 2 LED lights
Suitable for

For sites with limited indoor capacity that need a self contained spray bay outside, close to the vehicles.

Industries
Automotive

Overview

When indoor capacity runs out, add a spray bay in the yard. The SMART-X.T.N. installs outside as a self contained single skin steel building, 7 metres by 4 metres and 2.5 metres to eaves, with a manually operated roller door, personnel access door, skylights and three ATEX rated LED lights. A 1.1kW spark proof fan extracts at 2.06m3/s, giving 0.7m/sec air flow through the booth face in line with HSG140, so SMART repairs happen on site instead of leaving it.

Recommended uses

SMART repairs at dealerships, car supermarkets, PDI centres, vehicle auctions and vehicle hire operations, bringing repairs on site instead of sending vehicles away. Installed in the yard, close to where the vehicles are.

  • Building: 4m x 7m x 2.5m to eaves with a 10 degrees pitch roof
  • Roller door opening 3000mm x 2100mm
  • Plenum body: 1.2mm galvanised sheet metal of modular design, turret punched, pre-folded and ready for easy bolt together assembly
  • Exhaust fan: 1 x 1.1kW 3 phase or single phase belt driven axial fan with extraction rate of 2.06m3/s. Spark proof fan and motor. Complete with fan controller
  • Exhaust air provided gives 0.7m/sec air flow through the booth face as per HSG140
  • Exhaust filter: filtration by way of 1 x 2 stage paint stop filter media at 900mm high mounted in the exhaust chamber
  • Exhaust ducting: 500mm ducting fan mounted externally terminated with a jet cowl
  • Single skin building with 1 x roller door and 1 x PA door
  • Doors: 1 x 3000mm x 2100mm manually operated roller door; 1 x 12 point locking secure personnel access door
  • Wall detail: 24mm box profile wall cladding, single skin, plastisol coated steel sheeting
  • Roof detail: 30mm box profile roof cladding, single skin, plastisol coated steel sheeting, 10 degrees pitch with anti condensation barrier and skylights
  • Rain water: guttering and downpipes, galvanised steel hot dipped in plastisol coating; all base, eaves and ridge fillers included
  • Fixings: all necessary screws, bolt sets, masonry anchors, screw caps and brackets supplied
  • Framing: cold rolled Cee section columns and rafters; all purlins top hat sections; all framework hot dipped galvanised steel to BS EN 10346:2009 Fe E390G-Z275; sections designed to BS EN 1993-1-3:2006 using a combination of rational analysis and component testing
  • Lighting: 3 x LED ATEX zone 2 rated roof mounted lights
  • 0.7m/sec air flow through the booth face as per HSG140
  • Framework to BS EN 10346:2009; sections designed to BS EN 1993-1-3:2006
  • No planning permission required
  • Supplied with a documented maintenance programme; failure to comply may cause warranties to become null and void
  • Building: 7m L x 4m W x 2.5m to eaves, 10 degree pitch roof
  • Roller door 3000mm x 2100mm
  • 12 point locking personnel door
  • 500mm external ducting with jet cowl
At a glance
Price £21,600
Category SMART repair booths
Get a quote

Frequently asked questions

No. It installs as a self contained unit, so planning permission is not required and the project moves at build speed rather than planning speed.

Supply and installation of the complete building and extraction system, subject to location. All electrical supply and connections are excluded and must be carried out by a qualified electrician.

A steel building: single skin plastisol coated steel cladding on hot dipped galvanised Cee section framing, designed to BS EN 1993-1-3:2006, with galvanised guttering and downpipes.

Yes. The roof carries an anti condensation barrier, skylights bring in daylight, and three ATEX zone 2 rated LED lights keep working light consistent.

Yes. The 1.1kW spark proof fan extracts at 2.06m3/s, giving 0.7m/sec air flow through the booth face as per HSG140, through two stage paint stop filtration.

See it working in a real workshop

Read how bodyshops, fleets and industrial operators put Masterflo booths to work, and the floor space and compliance they gained.

Request a quote

We reply within one working day. Your enquiry is tagged to this product.

Enquiry: SMART-X.T.N. · External SMART repair spray booth

Enquire About This Product

Complete your details below and we’ll get back to you.